.. Document meta

:orphan:

.. |antsibull-internal-nbsp| unicode:: 0xA0
    :trim:

.. role:: ansible-attribute-support-label
.. role:: ansible-attribute-support-property
.. role:: ansible-attribute-support-full
.. role:: ansible-attribute-support-partial
.. role:: ansible-attribute-support-none
.. role:: ansible-attribute-support-na
.. role:: ansible-option-type
.. role:: ansible-option-elements
.. role:: ansible-option-required
.. role:: ansible-option-versionadded
.. role:: ansible-option-aliases
.. role:: ansible-option-choices
.. role:: ansible-option-choices-default-mark
.. role:: ansible-option-default-bold
.. role:: ansible-option-configuration
.. role:: ansible-option-returned-bold
.. role:: ansible-option-sample-bold

.. Anchors

.. _ansible_collections.cisco.dnac.inventory_intent_module:

.. Anchors: short name for ansible.builtin

.. Anchors: aliases



.. Title

cisco.dnac.inventory_intent module -- Resource module for Network Device
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

.. Collection note

.. note::
    This module is part of the `cisco.dnac collection <https://galaxy.ansible.com/cisco/dnac>`_ (version 6.10.4).

    To install it, use: :code:`ansible-galaxy collection install cisco.dnac`.
    You need further requirements to be able to use this module,
    see :ref:`Requirements <ansible_collections.cisco.dnac.inventory_intent_module_requirements>` for details.

    To use it in a playbook, specify: :code:`cisco.dnac.inventory_intent`.

.. version_added

.. rst-class:: ansible-version-added

New in cisco.dnac 6.8.0

.. contents::
   :local:
   :depth: 1

.. Deprecated


Synopsis
--------

.. Description

- Manage operations create, update and delete of the resource Network Device.
- Adds the device with given credential.
- Deletes the network device for the given Id.
- Sync the devices provided as input.


.. Aliases


.. Requirements

.. _ansible_collections.cisco.dnac.inventory_intent_module_requirements:

Requirements
------------
The below requirements are needed on the host that executes this module.

- dnacentersdk \>= 2.5.5
- python \>= 3.5






.. Options

Parameters
----------

.. rst-class:: ansible-option-table

.. list-table::
  :width: 100%
  :widths: auto
  :header-rows: 1

  * - Parameter
    - Comments

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config:

      .. rst-class:: ansible-option-title

      **config**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=dictionary` / :ansible-option-required:`required`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      List of devices with credentails to perform Add/Update/Delete/Resync operation


      .. raw:: html

        </div>
    
  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/admin_status"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/admin_status:

      .. rst-class:: ansible-option-title

      **admin_status**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/admin_status" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Status of Interface of a device, it can be (UP/DOWN).


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/clean_config"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/clean_config:

      .. rst-class:: ansible-option-title

      **clean_config**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/clean_config" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Required if need to delete the Provisioned device by clearing current configuration.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/cli_transport"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/cli_transport:

      .. rst-class:: ansible-option-title

      **cli_transport**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/cli_transport" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      The essential prerequisite for adding Network devices is the specification of the transport protocol (either SSH or Telnet) used by the device.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/compute_device"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/compute_device:

      .. rst-class:: ansible-option-title

      **compute_device**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/compute_device" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Compute Device flag.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/credential_update"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/credential_update:

      .. rst-class:: ansible-option-title

      **credential_update**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/credential_update" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Make this as true needed for the updation of device credentials and other device details.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/deployment_mode"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/deployment_mode:

      .. rst-class:: ansible-option-title

      **deployment_mode**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/deployment_mode" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Preview/Deploy [Preview means the configuration is not pushed to the device. Deploy makes the configuration pushed to the device]


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"Deploy"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/description"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/description:

      .. rst-class:: ansible-option-title

      **description**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/description" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Info about the global user defined field. Also used while updating interface details.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/device_added"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/device_added:

      .. rst-class:: ansible-option-title

      **device_added**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/device_added" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Make this as true needed for the addition of device in inventory.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/device_resync"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/device_resync:

      .. rst-class:: ansible-option-title

      **device_resync**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/device_resync" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Make this as true needed for the resyncing of device.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/device_updated"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/device_updated:

      .. rst-class:: ansible-option-title

      **device_updated**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/device_updated" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Make this as true needed for the updation of device role, interface details, device credentails or details.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces:

      .. rst-class:: ansible-option-title

      **dynamic_interfaces**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=dictionary`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Interface details of the wireless device


      .. raw:: html

        </div>
    
  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/interface_gateway"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/interface_gateway:

      .. rst-class:: ansible-option-title

      **interface_gateway**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/interface_gateway" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      The name identifier for the gateway associated with the interface.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/interface_ip_address"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/interface_ip_address:

      .. rst-class:: ansible-option-title

      **interface_ip_address**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/interface_ip_address" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Ip Address allocated to the interface


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/interface_name"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/interface_name:

      .. rst-class:: ansible-option-title

      **interface_name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/interface_name" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Name of the interface.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/interface_netmask_in_cidr"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/interface_netmask_in_cidr:

      .. rst-class:: ansible-option-title

      **interface_netmask_in_cidr**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/interface_netmask_in_cidr" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      The netmask of the interface, given in CIDR notation. This is an integer that represents the number of bits set in the netmask


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/lag_or_port_number"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/lag_or_port_number:

      .. rst-class:: ansible-option-title

      **lag_or_port_number**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/lag_or_port_number" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      The Link Aggregation Group (LAG) number or port number assigned to the interface.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/dynamic_interfaces/vlan_id"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/dynamic_interfaces/vlan_id:

      .. rst-class:: ansible-option-title

      **vlan_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/dynamic_interfaces/vlan_id" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      The VLAN (Virtual Local Area Network) ID associated with the network interface.


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/enable_password"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/enable_password:

      .. rst-class:: ansible-option-title

      **enable_password**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/enable_password" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's enable password.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/extended_discovery_info"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/extended_discovery_info:

      .. rst-class:: ansible-option-title

      **extended_discovery_info**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/extended_discovery_info" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's extended discovery info.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/force_sync"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/force_sync:

      .. rst-class:: ansible-option-title

      **force_sync**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/force_sync" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      If forcesync is true then device sync would run in high priority thread if available, else the sync will fail.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/hostname_list"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/hostname_list:

      .. rst-class:: ansible-option-title

      **hostname_list**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/hostname_list" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      A list of hostnames representing devices. Operations such as updating, deleting, resyncing, or rebooting can be performed as alternatives to using IP addresses.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/http_password"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/http_password:

      .. rst-class:: ansible-option-title

      **http_password**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/http_password" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's http password. Required for Adding Compute, Meraki, Firepower Management Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/http_port"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/http_port:

      .. rst-class:: ansible-option-title

      **http_port**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/http_port" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's http port number. Required for Adding Compute, Firepower Management Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/http_secure"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/http_secure:

      .. rst-class:: ansible-option-title

      **http_secure**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/http_secure" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      HttpSecure flag.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/http_username"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/http_username:

      .. rst-class:: ansible-option-title

      **http_username**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/http_username" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's http username. Required for Adding Compute,Firepower Management Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/interface_name"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/interface_name:

      .. rst-class:: ansible-option-title

      **interface_name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/interface_name" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Specify the interface name to update the details of the device interface. (For example, GigabitEthernet1/0/11, FortyGigabitEthernet1/1/2)


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/ip_address"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/ip_address:

      .. rst-class:: ansible-option-title

      **ip_address**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/ip_address" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's ipAddress. Required for Adding/Updating/Deleting/Resyncing Device except Meraki Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/mac_address_list"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/mac_address_list:

      .. rst-class:: ansible-option-title

      **mac_address_list**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/mac_address_list" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      A list of MAC addresses representing devices. Operations such as updating, deleting, resyncing, or rebooting can be performed as alternatives to using IP addresses.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/managed_ap_locations"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/managed_ap_locations:

      .. rst-class:: ansible-option-title

      **managed_ap_locations**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/managed_ap_locations" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Location of the sites allocated for the APs


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/name"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/name:

      .. rst-class:: ansible-option-title

      **name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/name" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Name of Global User Defined Field. Required for creating/deleting UDF and then assigning it to device.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/netconf_port"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/netconf_port:

      .. rst-class:: ansible-option-title

      **netconf_port**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/netconf_port" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's netconf port.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/operation_enum"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/operation_enum:

      .. rst-class:: ansible-option-title

      **operation_enum**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/operation_enum" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      enum(CREDENTIALDETAILS, DEVICEDETAILS) 0 to export Device Credential Details Or 1 to export Device Details.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/parameters"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/parameters:

      .. rst-class:: ansible-option-title

      **parameters**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/parameters" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      List of device parameters that needs to be exported to file.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/password"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/password:

      .. rst-class:: ansible-option-title

      **password**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/password" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's password. Required for Adding Network Device. Also needed for file encryption while exporting device in a csv file.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/reboot_device"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/reboot_device:

      .. rst-class:: ansible-option-title

      **reboot_device**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/reboot_device" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Make this as true needed for the Rebooting of Access Points.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/role"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/role:

      .. rst-class:: ansible-option-title

      **role**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/role" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Role of device which can be ACCESS, CORE, DISTRIBUTION, BORDER ROUTER, UNKNOWN.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"ACCESS"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/role_source"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/role_source:

      .. rst-class:: ansible-option-title

      **role_source**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/role_source" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      role source for the Device.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"AUTO"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/serial_number"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/serial_number:

      .. rst-class:: ansible-option-title

      **serial_number**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/serial_number" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's serial number.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/serial_number_list"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/serial_number_list:

      .. rst-class:: ansible-option-title

      **serial_number_list**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/serial_number_list" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      A list of serial numbers representing devices. Operations such as updating, deleting, resyncing, or rebooting can be performed as alternatives to using IP addresses.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/site_name"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/site_name:

      .. rst-class:: ansible-option-title

      **site_name**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/site_name" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Required for Provisioning of Wired and Wireless Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_auth_passphrase"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_auth_passphrase:

      .. rst-class:: ansible-option-title

      **snmp_auth_passphrase**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_auth_passphrase" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp auth passphrase. Required for Adding Network, Compute, Third Party Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_auth_protocol"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_auth_protocol:

      .. rst-class:: ansible-option-title

      **snmp_auth_protocol**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_auth_protocol" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Auth Protocol.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"SHA"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_mode"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_mode:

      .. rst-class:: ansible-option-title

      **snmp_mode**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_mode" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Mode.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"AUTHPRIV"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_priv_passphrase"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_priv_passphrase:

      .. rst-class:: ansible-option-title

      **snmp_priv_passphrase**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_priv_passphrase" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Private Passphrase. Required for Adding Network, Compute, Third Party Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_priv_protocol"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_priv_protocol:

      .. rst-class:: ansible-option-title

      **snmp_priv_protocol**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_priv_protocol" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Private Protocol. Required for Adding Network, Compute, Third Party Devices. Must be given in playbook if you are updating the device credentails.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_retry"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_retry:

      .. rst-class:: ansible-option-title

      **snmp_retry**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_retry" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Retry.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`3`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_ro_community"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_ro_community:

      .. rst-class:: ansible-option-title

      **snmp_ro_community**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_ro_community" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp ROCommunity. Required for Adding V2C Devices.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"public"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_rw_community"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_rw_community:

      .. rst-class:: ansible-option-title

      **snmp_rw_community**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_rw_community" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp RWCommunity. Required for Adding V2C Devices.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"private"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_timeout"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_timeout:

      .. rst-class:: ansible-option-title

      **snmp_timeout**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_timeout" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Timeout.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`5`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_username"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_username:

      .. rst-class:: ansible-option-title

      **snmp_username**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_username" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Username. Required for Adding Network, Compute, Third Party Devices.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/snmp_version"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/snmp_version:

      .. rst-class:: ansible-option-title

      **snmp_version**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/snmp_version" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's snmp Version.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"v3"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/type"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/type:

      .. rst-class:: ansible-option-title

      **type**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/type" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Select Device's type from NETWORK\_DEVICE, COMPUTE\_DEVICE, MERAKI\_DASHBOARD, THIRD\_PARTY\_DEVICE, FIREPOWER\_MANAGEMENT\_SYSTEM.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"NETWORK\_DEVICE"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/update_mgmt_ipaddresslist"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/update_mgmt_ipaddresslist:

      .. rst-class:: ansible-option-title

      **update_mgmt_ipaddresslist**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/update_mgmt_ipaddresslist" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`list` / :ansible-option-elements:`elements=dictionary`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Network Device's update Mgmt IPaddress List.


      .. raw:: html

        </div>
    
  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/update_mgmt_ipaddresslist/exist_mgmt_ipaddress"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/update_mgmt_ipaddresslist/exist_mgmt_ipaddress:

      .. rst-class:: ansible-option-title

      **exist_mgmt_ipaddress**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/update_mgmt_ipaddresslist/exist_mgmt_ipaddress" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's existing Mgmt IpAddress.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/update_mgmt_ipaddresslist/new_mgmt_ipaddress"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/update_mgmt_ipaddresslist/new_mgmt_ipaddress:

      .. rst-class:: ansible-option-title

      **new_mgmt_ipaddress**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/update_mgmt_ipaddresslist/new_mgmt_ipaddress" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Device's new Mgmt IpAddress.


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/username"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/username:

      .. rst-class:: ansible-option-title

      **username**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/username" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Network Device's username. Required for Adding Network Device.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/value"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/value:

      .. rst-class:: ansible-option-title

      **value**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/value" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Value to assign to tag with or without the same user defined field name.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/vlan_id"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/vlan_id:

      .. rst-class:: ansible-option-title

      **vlan_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/vlan_id" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Unique Id number assigned to a VLAN within a network.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-indent"></div><div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config/voice_vlan_id"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config/voice_vlan_id:

      .. rst-class:: ansible-option-title

      **voice_vlan_id**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config/voice_vlan_id" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`integer`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-indent-desc"></div><div class="ansible-option-cell">

      Identifier used to distinguish a specific VLAN that is dedicated to voice traffic.


      .. raw:: html

        </div>


  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-config_verify"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-config_verify:

      .. rst-class:: ansible-option-title

      **config_verify**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-config_verify" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Set to True to verify the Cisco Catalyst Center config after applying the playbook config.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_debug"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_debug:

      .. rst-class:: ansible-option-title

      **dnac_debug**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_debug" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Flag for Cisco DNA Center SDK to enable debugging.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_host"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_host:

      .. rst-class:: ansible-option-title

      **dnac_host**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_host" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string` / :ansible-option-required:`required`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The Cisco DNA Center hostname.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_log"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_log:

      .. rst-class:: ansible-option-title

      **dnac_log**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_log" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Flag to enable/disable playbook execution logging.

      When true and dnac\_log\_file\_path is provided, - Create the log file at the execution location with the specified name.

      When true and dnac\_log\_file\_path is not provided, - Create the log file at the execution location with the name 'dnac.log'.

      When false, - Logging is disabled.

      If the log file doesn't exist, - It is created in append or write mode based on the "dnac\_log\_append" flag.

      If the log file exists, - It is overwritten or appended based on the "dnac\_log\_append" flag.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`false` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`true`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_log_append"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_log_append:

      .. rst-class:: ansible-option-title

      **dnac_log_append**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_log_append" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Determines the mode of the file. Set to True for 'append' mode. Set to False for 'write' mode.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry-default:`true` :ansible-option-choices-default-mark:`← (default)`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_log_file_path"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_log_file_path:

      .. rst-class:: ansible-option-title

      **dnac_log_file_path**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_log_file_path" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Governs logging. Logs are recorded if dnac\_log is True.

      If path is not specified, - When 'dnac\_log\_append' is True, 'dnac.log' is generated in the current Ansible directory; logs are appended. - When 'dnac\_log\_append' is False, 'dnac.log' is generated; logs are overwritten.

      If path is specified, - When 'dnac\_log\_append' is True, the file opens in append mode. - When 'dnac\_log\_append' is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"dnac.log"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_log_level"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_log_level:

      .. rst-class:: ansible-option-title

      **dnac_log_level**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_log_level" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG].

      CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages.

      ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages.

      WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages.

      INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages.

      DEBUG provides detailed diagnostic info. Displays all log messages.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"WARNING"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_password"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_password:

      .. rst-class:: ansible-option-title

      **dnac_password**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_password" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The Cisco DNA Center password to authenticate.


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_port"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_port:

      .. rst-class:: ansible-option-title

      **dnac_port**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_port" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The Cisco DNA Center port.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"443"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_username"></div>
        <div class="ansibleOptionAnchor" id="parameter-user"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_username:
      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-user:

      .. rst-class:: ansible-option-title

      **dnac_username**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_username" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-aliases:`aliases: user`

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The Cisco DNA Center username to authenticate.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"admin"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_verify"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_verify:

      .. rst-class:: ansible-option-title

      **dnac_verify**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_verify" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Flag to enable or disable SSL certificate verification.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry-default:`true` :ansible-option-choices-default-mark:`← (default)`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-dnac_version"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-dnac_version:

      .. rst-class:: ansible-option-title

      **dnac_version**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-dnac_version" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Informs the SDK which version of Cisco DNA Center to use.


      .. rst-class:: ansible-option-line

      :ansible-option-default-bold:`Default:` :ansible-option-default:`"2.2.3.3"`

      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-state"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-state:

      .. rst-class:: ansible-option-title

      **state**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-state" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`string`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      The state of Cisco Catalyst Center after module completion.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry-default:`"merged"` :ansible-option-choices-default-mark:`← (default)`
      - :ansible-option-choices-entry:`"deleted"`


      .. raw:: html

        </div>

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="parameter-validate_response_schema"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__parameter-validate_response_schema:

      .. rst-class:: ansible-option-title

      **validate_response_schema**

      .. raw:: html

        <a class="ansibleOptionLink" href="#parameter-validate_response_schema" title="Permalink to this option"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`boolean`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema.


      .. rst-class:: ansible-option-line

      :ansible-option-choices:`Choices:`

      - :ansible-option-choices-entry:`false`
      - :ansible-option-choices-entry-default:`true` :ansible-option-choices-default-mark:`← (default)`


      .. raw:: html

        </div>


.. Attributes


.. Notes

Notes
-----

.. note::
   - SDK Method used are devices.Devices.add\_device, devices.Devices.delete\_device\_by\_id, devices.Devices.sync\_devices,
   - Paths used are post /dna/intent/api/v1/network-device, delete /dna/intent/api/v1/network-device/{id}, put /dna/intent/api/v1/network-device,
   - Removed 'managementIpAddress' options in v4.3.0.
   - Does not support \ :literal:`check\_mode`\ 
   - The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
   - The parameters starting with dnac\_ are used by the Cisco DNAC Python SDK to establish the connection

.. Seealso

See Also
--------

.. seealso::

   `Cisco Catalyst Center documentation for Devices AddDevice2 <https://developer.cisco.com/docs/dna-center/#!add-device>`_
       Complete reference of the AddDevice2 API.
   `Cisco Catalyst Center documentation for Devices DeleteDeviceById <https://developer.cisco.com/docs/dna-center/#!delete-device-by-id>`_
       Complete reference of the DeleteDeviceById API.
   `Cisco Catalyst Center documentation for Devices SyncDevices2 <https://developer.cisco.com/docs/dna-center/#!sync-devices>`_
       Complete reference of the SyncDevices2 API.

.. Examples

Examples
--------

.. code-block:: yaml+jinja

    
    - name: Add new device in Inventory with full credentials
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - cli_transport: string
            compute_device: false
            enable_password: string
            extended_discovery_info: string
            http_password: string
            http_port: string
            http_secure: false
            http_username: string
            ip_address:
            - string
            netconf_port: string
            password: string
            serial_number: string
            snmp_auth_passphrase: string
            snmp_auth_protocol: string
            snmp_mode: string
            snmp_priv_passphrase: string
            snmp_priv_protocol: string
            snmp_ro_community: string
            snmp_rw_community: string
            snmp_retry: 3
            snmp_timeout: 5
            snmp_username: string
            snmp_version: string
            type: string
            device_added: true
            username: string

    - name: Add new Compute device in Inventory with full credentials.Inputs needed for Compute Device
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            http_username: string
            http_password: string
            http_port: string
            snmp_auth_passphrase: string
            snmp_auth_protocol: string
            snmp_mode: string
            snmp_priv_passphrase: string
            snmp_priv_protocol: string
            snmp_retry:  3
            snmp_timeout: 5
            snmp_username: string
            compute_device: true
            username: string
            device_added: true
            type: "COMPUTE_DEVICE"

    - name: Add new Meraki device in Inventory with full credentials.Inputs needed for Meraki Device.
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - http_password: string
            device_added: true
            type: "MERAKI_DASHBOARD"

    - name: Add new Firepower Management device in Inventory with full credentials.Input needed to add Device.
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            http_username: string
            http_password: string
            http_port: string
            device_added: true
            type: "FIREPOWER_MANAGEMENT_SYSTEM"

    - name: Add new Third Party device in Inventory with full credentials.Input needed to add Device.
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            snmp_auth_passphrase: string
            snmp_auth_protocol: string
            snmp_mode: string
            snmp_priv_passphrase: string
            snmp_priv_protocol: string
            snmp_retry:  3
            snmp_timeout: 5
            snmp_username: string
            device_added: true
            type: "THIRD_PARTY_DEVICE"

    - name: Update device details or credentails in Inventory
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - cli_transport: string
            compute_device: false
            password: string
            enable_password: string
            extended_discovery_info: string
            http_password: string
            http_port: string
            http_secure: false
            http_username: string
            ip_address:
            - string
            netconf_port: string
            serial_number: string
            snmp_auth_passphrase: string
            snmp_auth_protocol: string
            snmp_mode: string
            snmp_priv_passphrase: string
            snmp_priv_protocol: string
            snmp_username: string
            snmp_version: string
            type: string
            device_updated: true
            credential_update: true
            update_mgmt_ipaddresslist:
            - exist_mgmt_ipaddress: string
              new_mgmt_ipaddress: string
            username: string

    - name: Update new management IP address of device in inventory
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - device_updated: true
            ip_address:
            - string
            credential_update: true
            update_mgmt_ipaddresslist:
            - exist_mgmt_ipaddress: string
              new_mgmt_ipaddress: string

    - name: Associate Wired Devices to site and Provisioned it in Inventory
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            provision_wired_device:
              site_name: string

    - name: Associate Wireless Devices to site and Provisioned it in Inventory
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            provision_wireless_device:
            - site_name: string
            managed_ap_locations:
            - string
            dynamic_interfaces:
            - interface_ip_address: string
              interface_netmask_in_cidr: int
              interface_gateway: string
              lag_or_port_number: int
              vlan_id: int
              interface_name: string

    - name: Update Device Role with IP Address
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            device_updated: true
            update_device_role:
              role: string
              role_source: string

    - name: Update Interface details with IP Address
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            device_updated: true
            update_interface_details:
              description: str
              admin_status: str
              vlan_id: int
              voice_vlan_id: int
              deployment_mode: str
              interface_name: str

    - name: Export Device Details in a CSV file Interface details with IP Address
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            export_device_list:
              password: str
              operation_enum: str
              parameters: str

    - name: Create Global User Defined with IP Address
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            add_user_defined_field:
              name: string
              description: string
              value: string

    - name: Resync Device with IP Addresses
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            device_resync: true
            force_sync: false

    - name: Reboot AP Devices with IP Addresses
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: merged
        config:
          - ip_address:
            - string
            reboot_device: true

    - name: Delete Provision/Unprovision Devices by IP Address
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log: False
        dnac_log_level: "{{dnac_log_level}}"
        state: deleted
        config:
          - ip_address:
            - string
            clean_config: false

    - name: Delete Global User Defined Field with name
      cisco.dnac.inventory_intent:
        dnac_host: "{{dnac_host}}"
        dnac_username: "{{dnac_username}}"
        dnac_password: "{{dnac_password}}"
        dnac_verify: "{{dnac_verify}}"
        dnac_port: "{{dnac_port}}"
        dnac_version: "{{dnac_version}}"
        dnac_debug: "{{dnac_debug}}"
        dnac_log_level: "{{dnac_log_level}}"
        dnac_log: False
        state: deleted
        config:
        - ip_address:
            - string
          add_user_defined_field:
            name: string





.. Facts


.. Return values

Return Values
-------------
Common return values are documented :ref:`here <common_return_values>`, the following are the fields unique to this module:

.. rst-class:: ansible-option-table

.. list-table::
  :width: 100%
  :widths: auto
  :header-rows: 1

  * - Key
    - Description

  * - .. raw:: html

        <div class="ansible-option-cell">
        <div class="ansibleOptionAnchor" id="return-dnac_response"></div>

      .. _ansible_collections.cisco.dnac.inventory_intent_module__return-dnac_response:

      .. rst-class:: ansible-option-title

      **dnac_response**

      .. raw:: html

        <a class="ansibleOptionLink" href="#return-dnac_response" title="Permalink to this return value"></a>

      .. rst-class:: ansible-option-type-line

      :ansible-option-type:`dictionary`

      .. raw:: html

        </div>

    - .. raw:: html

        <div class="ansible-option-cell">

      A dictionary or list with the response returned by the Cisco Catalyst Center Python SDK


      .. rst-class:: ansible-option-line

      :ansible-option-returned-bold:`Returned:` always

      .. rst-class:: ansible-option-line
      .. rst-class:: ansible-option-sample

      :ansible-option-sample-bold:`Sample:` :ansible-rv-sample-value:`{"response": {"taskId": "string", "url": "string"}, "version": "string"}`


      .. raw:: html

        </div>



..  Status (Presently only deprecated)


.. Authors

Authors
~~~~~~~

- Abhishek Maheshwari (@abmahesh) Madhan Sankaranarayanan (@madhansansel)



.. Extra links

Collection links
~~~~~~~~~~~~~~~~

.. raw:: html

  <p class="ansible-links">
    <a href="https://github.com/cisco-en-programmability/dnacenter-ansible/issues" aria-role="button" target="_blank" rel="noopener external">Issue Tracker</a>
    <a href="https://github.com/cisco-en-programmability/dnacenter-ansible" aria-role="button" target="_blank" rel="noopener external">Repository (Sources)</a>
  </p>

.. Parsing errors