cisco.dnac.network_update module – Resource module for Network Update

Note

This module is part of the cisco.dnac collection (version 6.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.dnac.

To use it in a playbook, specify: cisco.dnac.network_update.

New in version 3.1.0: of cisco.dnac

Synopsis

• Manage operation update of the resource Network Update.

• API to update network for DHCP and DNS center server settings.

Note

This module has a corresponding action plugin.

Requirements

The below requirements are needed on the host that executes this module.

• dnacentersdk >= 2.4.8

• python >= 3.5

Parameters

Parameter	Comments
dnac_debug boolean	Flag for Cisco DNA Center SDK to enable debugging. Choices: no ← (default) yes
dnac_host string / required	The Cisco DNA Center hostname.
dnac_password string	The Cisco DNA Center password to authenticate.
dnac_port integer	The Cisco DNA Center port. Default: 443
dnac_username aliases: user string	The Cisco DNA Center username to authenticate. Default: “admin”
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: no yes ← (default)
dnac_version string	Informs the SDK which version of Cisco DNA Center to use. Default: “2.2.3.3”
settings dictionary	Network Update’s settings.
clientAndEndpoint_aaa dictionary	Network Update’s clientAndEndpoint_aaa.
ipAddress string	IP address for ISE serve (eg 1.1.1.4). Mandatory for ISE servers.
network string	IP address for AAA or ISE server (eg 2.2.2.1).
protocol string	Protocol for AAA or ISE serve (eg RADIUS).
servers string	Server type AAA or ISE server (eg AAA).
sharedSecret string	Shared secret for ISE server. Supported only by ISE servers.
dhcpServer list / elements=string	Dhcp serve Ip (eg 1.1.1.1).
dnsServer dictionary	Network Update’s dnsServer.
domainName string	Domain name of DHCP (eg; cisco). It can only contain alphanumeric characters or hyphen.
primaryIpAddress string	Primary ip address for DHCP (eg 2.2.2.2). Valid range 1.0.0.0 - 223.255.255.255.
secondaryIpAddress string	Secondary ip address for DHCP (eg 3.3.3.3. Valid range 1.0.0.0 - 223.255.255.255).
messageOfTheday dictionary	Network Update’s messageOfTheday.
bannerMessage string	Massage for banner message (eg; Good day).
retainExistingBanner string	Retain existing banner message (eg “true” or “false”).
netflowcollector dictionary	Network Update’s netflowcollector.
ipAddress string	IP address for netflow collector (eg 3.3.3.1).
port integer	Port for netflow collector (eg; 443).
network_aaa dictionary	Network Update’s network_aaa.
ipAddress string	IP address for AAA and ISE server (eg 1.1.1.1). Mandatory for ISE servers and for AAA consider this as additional Ip.
network string	IP address for AAA or ISE server (eg 2.2.2.2). For AAA server consider it as primary IP and For ISE consider as Network.
protocol string	Protocol for AAA or ISE serve (eg RADIUS).
servers string	Server type for AAA network (eg AAA).
sharedSecret string	Shared secret for ISE server. Supported only by ISE servers.
ntpServer list / elements=string	IP address for NTP server (eg 1.1.1.2).
snmpServer dictionary	Network Update’s snmpServer.
configureDnacIP boolean	Configuration dnac ip for snmp server (eg true). Choices: no yes
ipAddresses list / elements=string	IP address for snmp server (eg 4.4.4.1).
syslogServer dictionary	Network Update’s syslogServer.
configureDnacIP boolean	Configuration dnac ip for syslog server (eg true). Choices: no yes
ipAddresses list / elements=string	IP address for syslog server (eg 4.4.4.4).
timezone string	Input for time zone (eg Africa/Abidjan).
siteId string	SiteId path parameter. Site id to update the network settings which is associated with the site.
validate_response_schema boolean	Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: no yes ← (default)

Notes

Note

• SDK Method used are network_settings.NetworkSettings.update_network,

• Paths used are put /dna/intent/api/v1/network/{siteId}

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

• The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

Examples

- name: Update by id
  cisco.dnac.network_update:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    settings:
      clientAndEndpoint_aaa:
        ipAddress: string
        network: string
        protocol: string
        servers: string
        sharedSecret: string
      dhcpServer:
      - string
      dnsServer:
        domainName: string
        primaryIpAddress: string
        secondaryIpAddress: string
      messageOfTheday:
        bannerMessage: string
        retainExistingBanner: string
      netflowcollector:
        ipAddress: string
        port: 0
      network_aaa:
        ipAddress: string
        network: string
        protocol: string
        servers: string
        sharedSecret: string
      ntpServer:
      - string
      snmpServer:
        configureDnacIP: true
        ipAddresses:
        - string
      syslogServer:
        configureDnacIP: true
        ipAddresses:
        - string
      timezone: string
    siteId: string

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
dnac_response dictionary	A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: “{\n \”executionId\”: \”string\”,\n \”executionStatusUrl\”: \”string\”,\n \”message\”: \”string\”\n}\n”

Authors

• Rafael Campos (@racampos)