cisco.dnac.provision_intent module -- Resource module for provision functions

Note

This module is part of the cisco.dnac collection (version 6.13.2).

To install it, use: ansible-galaxy collection install cisco.dnac. You need further requirements to be able to use this module, see Requirements for details.

To use it in a playbook, specify: cisco.dnac.provision_intent.

New in cisco.dnac 6.6.0

Synopsis

• Manage operation related to wired and wireless provisioning

• API to re-provision provisioned devices

• API to un-provision provisioned devices

Requirements

The below requirements are needed on the host that executes this module.

• dnacentersdk == 2.4.5

• python >= 3.5

Parameters

Parameter	Comments
config list / elements=dictionary / required	List of details of device being managed.
dynamic_interfaces list / elements=dictionary	Interface details of the controller
interface_gateway string	Ip Address allocated to the interface
interface_ip_address string	Ip Address allocated to the interface
interface_name string	Ip Address allocated to the interface
interface_netmask_in_c_i_d_r integer	Ip Address allocated to the interface
lag_or_port_number integer	Ip Address allocated to the interface
vlan_id integer	Ip Address allocated to the interface
managed_ap_locations list / elements=string	Location of the sites allocated for the APs
management_ip_address string / required	Management Ip Address .
site_name string	Name of site where the device needs to be added.
config_verify boolean	Set to True to verify the Cisco Catalyst Center config after applying the playbook config. Choices: :ansible-option-choices-entry-default:`false` ← (default) :ansible-option-choices-entry:`true`
dnac_api_task_timeout integer	Defines the timeout in seconds for API calls to retrieve task details. If the task details are not received within this period, the process will end, and a timeout notification will be logged. Default: :ansible-option-default:`1200`
dnac_debug boolean	Flag for Cisco DNA Center SDK to enable debugging. Choices: :ansible-option-choices-entry-default:`false` ← (default) :ansible-option-choices-entry:`true`
dnac_host string / required	The Cisco DNA Center hostname.
dnac_log boolean	Flag to enable/disable playbook execution logging. When true and dnac_log_file_path is provided, - Create the log file at the execution location with the specified name. When true and dnac_log_file_path is not provided, - Create the log file at the execution location with the name 'dnac.log'. When false, - Logging is disabled. If the log file doesn't exist, - It is created in append or write mode based on the "dnac_log_append" flag. If the log file exists, - It is overwritten or appended based on the "dnac_log_append" flag. Choices: :ansible-option-choices-entry-default:`false` ← (default) :ansible-option-choices-entry:`true`
dnac_log_append boolean	Determines the mode of the file. Set to True for 'append' mode. Set to False for 'write' mode. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry-default:`true` ← (default)
dnac_log_file_path string	Governs logging. Logs are recorded if dnac_log is True. If path is not specified, - When 'dnac_log_append' is True, 'dnac.log' is generated in the current Ansible directory; logs are appended. - When 'dnac_log_append' is False, 'dnac.log' is generated; logs are overwritten. If path is specified, - When 'dnac_log_append' is True, the file opens in append mode. - When 'dnac_log_append' is False, the file opens in write (w) mode. - In shared file scenarios, without append mode, content is overwritten after each module execution. - For a shared log file, set append to False for the 1st module (to overwrite); for subsequent modules, set append to True. Default: :ansible-option-default:`"dnac.log"`
dnac_log_level string	Sets the threshold for log level. Messages with a level equal to or higher than this will be logged. Levels are listed in order of severity [CRITICAL, ERROR, WARNING, INFO, DEBUG]. CRITICAL indicates serious errors halting the program. Displays only CRITICAL messages. ERROR indicates problems preventing a function. Displays ERROR and CRITICAL messages. WARNING indicates potential future issues. Displays WARNING, ERROR, CRITICAL messages. INFO tracks normal operation. Displays INFO, WARNING, ERROR, CRITICAL messages. DEBUG provides detailed diagnostic info. Displays all log messages. Default: :ansible-option-default:`"WARNING"`
dnac_password string	The Cisco DNA Center password to authenticate.
dnac_port string	The Cisco DNA Center port. Default: :ansible-option-default:`"443"`
dnac_task_poll_interval integer	Specifies the interval in seconds between successive calls to the API to retrieve task details. Default: :ansible-option-default:`2`
dnac_username aliases: user string	The Cisco DNA Center username to authenticate. Default: :ansible-option-default:`"admin"`
dnac_verify boolean	Flag to enable or disable SSL certificate verification. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry-default:`true` ← (default)
dnac_version string	Informs the SDK which version of Cisco DNA Center to use. Default: :ansible-option-default:`"2.2.3.3"`
state string	The state of DNAC after module completion. Choices: :ansible-option-choices-entry-default:`"merged"` ← (default) :ansible-option-choices-entry:`"deleted"`
validate_response_schema boolean	Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: :ansible-option-choices-entry:`false` :ansible-option-choices-entry-default:`true` ← (default)

Notes

Note

• SDK Methods used are sites.Sites.get_site, devices.Devices.get_network_device_by_ip, task.Task.get_task_by_id, sda.Sda.get_provisioned_wired_device, sda.Sda.re_provision_wired_device, sda.Sda.provision_wired_device, wireless.Wireless.provision

• Paths used are get /dna/intent/api/v1/site get /dna/intent/api/v1/network-device/ip-address/{ipAddress} get /dna/intent/api/v1/task/{taskId} get /dna/intent/api/v1/business/sda/provision-device put /dna/intent/api/v1/business/sda/provision-device post /dna/intent/api/v1/business/sda/provision-device post /dna/intent/api/v1/wireless/provision

• Does not support check_mode

• The plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK

• The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection

Examples

- name: Create/Modify a new provision
  cisco.dnac.provision_intent:
    dnac_host: "{{dnac_host}}"
    dnac_username: "{{dnac_username}}"
    dnac_password: "{{dnac_password}}"
    dnac_verify: "{{dnac_verify}}"
    dnac_port: "{{dnac_port}}"
    dnac_version: "{{dnac_version}}"
    dnac_debug: "{{dnac_debug}}"
    dnac_log: True
    state: merged
    config:
        - site_name: string
          management_ip_address: string
          managed_ap_locations: list
          dynamic_interfaces:
            - vlan_id: integer
              interface_name: string
              interface_ip_address: string
              interface_gateway: string
              interface_netmask_in_c_i_d_r: integer
              lag_or_port_number: integer

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
response_1 dictionary	A dictionary with details of provision is returned Returned: always Sample: :ansible-rv-sample-value:`"{\\n \\"response\\":\\n {\\n \\"response\\": String,\\n \\"version\\": String\\n },\\n \\"msg\\": String\\n}\\n"`
response_2 list / elements=string	A list with the response returned by the Cisco DNAC Python SDK Returned: always Sample: :ansible-rv-sample-value:`["{\\n \\"response\\": []", "\\n \\"msg\\": String\\n}\\n"]`
response_3 dictionary	A dictionary with the exisiting details as returned by the Cisco DNAC Python SDK Returned: always Sample: :ansible-rv-sample-value:`"{\\n \\"response\\": String,\\n \\"msg\\": String\\n}\\n"`

Authors

• Abinash Mishra (@abimishr)

Collection links

Issue Tracker Repository (Sources)