cisco.dnac.interfaces_info module -- Information module for Interfaces Info
Note
This module is part of the cisco.dnac collection (version 6.27.0).
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.interfaces_info.
New in cisco.dnac 6.15.0
Synopsis
This module represents an alias of the module interfaces_v1_info
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Attribute query parameter. The following list of attributes can be provided in the attribute field id,adminStatus, description,duplexConfig,duplexOper,interfaceIfIndex,interfaceType,ipv4Address,ipv6AddressLi st,isL3Interface,isWan,macAddress,mediaType,name,operStatus,peerStackMember,peerStackPort, portChannelId,portMode, portType,rxDiscards,rxError,rxRate,rxUtilization,speed,stackPortType,timestamp,txDis cards,txError,txRate,txUtilization,vlanId,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,sit eName,siteHierarchy,siteHierarchyId,poeAdminStatus,poeOperStatus,chassisId,moduleId,pdClassSignal,pdClassSpa re,pdDeviceType,pdDeviceModel,pdPowerAdminMaxInWatt,pdPowerBudgetInWatt,pdPowerConsumedInWatt,pdPowerRemaini ngInWatt,pdMaxPowerDrawn,pdConnectedDeviceList,poeOperPriority,fastPoEEnabled,perpetualPoEEnabled,policingPo EEnabled,upoePlusEnabled,fourPairEnabled,poeDataTimestamp,pdLocation,pdDeviceName,pdConnectedSwitch,connecte dSwitchUuid,ieeeCompliant,connectedSwitchType If length of attribute list is too long, please use 'views' param instead. Examples attributes=name (single attribute requested) attributes=name&description&duplexOper (multiple attributes with comma separator). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices: |
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: :ansible-option-default:`443` |
|
The Cisco DNA Center username to authenticate. Default: :ansible-option-default:`"admin"` |
|
Flag to enable or disable SSL certificate verification. Choices: |
|
Informs the SDK which version of Cisco DNA Center to use. Default: :ansible-option-default:`"2.3.7.6"` |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
Additional headers. |
|
Id path parameter. The interface Uuid. |
|
InterfaceId query parameter. The list of Interface Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `interfaceId=6bef213c-19ca-4170-8375-b694e251101c` (single interface uuid ) `interfaceId=6bef213c- 19ca-4170-8375-b694e251101c&32219612-819e-4b5e-a96b-cf22aca13dd9&2541e9a7-b80d-4955-8aa2-79b233318ba0` (multiple Interface uuid with & separator). |
|
InterfaceName query parameter. The list of Interface name (Ex. `GigabitEthernet1/0/1`) This field supports wildcard (`*`) character-based search. Ex `*1/0/1*` or `1/0/1*` or `*1/0/1` Examples `interfaceNames=GigabitEthernet1/0/1` (single interface name) `interfaceNames=GigabitEthernet1/0/1&GigabitEthernet2/0/1&GigabitEthernet3/0/1` (multiple interface names with & separator). |
|
Limit query parameter. Maximum number of records to return. |
|
NetworkDeviceId query parameter. The list of Network Device Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `networkDeviceId=6bef213c-19ca-4170-8375-b694e251101c` (single networkDeviceId requested) `networkDeviceId=6bef213c-19ca-4170-8375- b694e251101c&networkDeviceId=32219612-819e-4b5e-a96b-cf22aca13dd9&networkDeviceId=2541e9a7-b80d-4955-8aa2- 79b233318ba0` (multiple networkDeviceIds with & separator). |
|
NetworkDeviceIpAddress query parameter. The list of Network Device management IP Address. (Ex. `121.1.1.10`) This field supports wildcard (`*`) character-based search. Ex `*1.1*` or `1.1*` or `*1.1` Examples `networkDeviceIpAddress=121.1.1.10` `networkDeviceIpAddress=121.1.1.10&networkDeviceIpAddress=172.20.1.10&networkDeviceIpAddress=10.10.20.10` (multiple networkDevice IP Address with & separator). |
|
NetworkDeviceMacAddress query parameter. The list of Network Device MAC Address. (Ex. `64 f6 9d 07 9a 00`) This field supports wildcard (`*`) character-based search. Ex `*AB AB AB*` or `AB AB AB*` or `*AB AB AB` Examples `networkDeviceMacAddress=64 f6 9d 07 9a 00` `networkDeviceMacAddress=64 f6 9d 07 9a 00&networkDeviceMacAddress=70 56 9d 07 ac 77` (multiple networkDevice MAC addresses with & separator). |
|
Offset query parameter. Specifies the starting point within all records returned by the API. It's one based offset. The starting value is 1. |
|
Order query parameter. The sort order of the field ascending or descending. |
|
SiteHierarchy query parameter. The full hierarchical breakdown of the site tree starting from Global site name and ending with the specific site name. The Root site is named "Global" (Ex. `Global/AreaName/BuildingName/FloorName`) This field supports wildcard asterisk (`*`) character search support. E.g. `*/San*, */San, /San*` Examples `?siteHierarchy=Global/AreaName/BuildingName/FloorName` (single siteHierarchy requested) `?siteHierarchy=Global/AreaName/BuildingName/FloorName&siteHierarchy=Global /AreaName2/BuildingName2/FloorName2` (multiple siteHierarchies requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyIds requested). |
|
SiteId query parameter. The UUID of the site. (Ex. `flooruuid`) Examples `?siteId=id1` (single id requested) `?siteId=id1&siteId=id2&siteId=id3` (multiple ids requested). |
|
SortBy query parameter. A field within the response to sort by. |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: |
|
View query parameter. Views which are supported by this API. Each view represents a specific data set. ### Response data provided by each view 1. **configuration** id,name,adminStatus,description,duplexConfig,duplex Oper,interfaceIfIndex,interfaceType,ipv4Address,ipv6AddressList,isL3Interface,isWan,macAddress,mediaType,nam e,operStatus, portChannelId,portMode, portType,speed,timestamp,vlanId,networkDeviceId,networkDeviceIpAddress ,networkDeviceMacAddress,siteName,siteHierarchy,siteHierarchyId 2. **statistics** id,name,rxDiscards,rxError ,rxRate,rxUtilization,txDiscards,txError,txRate,txUtilization,networkDeviceId,networkDeviceIpAddress,network DeviceMacAddress,siteName,siteHierarchy,siteHierarchyId 3. **stackPort** id,name,peerStackMember,peerStackPo rt,stackPortType,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,siteName,siteHierarchy,siteH ierarchyId 4. **poE** id, name,rxDiscards,rxError,rxRate,rxUtilization,txDiscards,txError,txRate,txUtilizati on,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,siteName,siteHierarchy,siteHierarchyId When this query parameter is not added by default all configuration attributes will be available in the response. **configuration,statistics,stackPort**. |
Notes
Note
SDK Method used are devices.Devices.get_the_interface_data_for_the_given_interface_idinstance_uuid_along_with_the_statistics_and_poe_data_v1, devices.Devices.gets_interfaces_along_with_statistics_and_poe_data_from_all_network_devices_v1,
Paths used are get /dna/data/api/v1/interfaces, get /dna/data/api/v1/interfaces/{id},
It should be noted that this module is an alias of interfaces_v1_info
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Devices GetTheInterfaceDataForTheGivenInterfaceIdinstanceUuidAlongWithTheStatisticsAndPoeDataV1
Complete reference of the GetTheInterfaceDataForTheGivenInterfaceIdinstanceUuidAlongWithTheStatisticsAndPoeDataV1 API.
- Cisco DNA Center documentation for Devices GetsInterfacesAlongWithStatisticsAndPoeDataFromAllNetworkDevicesV1
Complete reference of the GetsInterfacesAlongWithStatisticsAndPoeDataFromAllNetworkDevicesV1 API.
Examples
- name: Get all Interfaces Info
cisco.dnac.interfaces_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
limit: 0
offset: 0
sortBy: string
order: string
siteHierarchy: string
siteHierarchyId: string
siteId: string
view: string
attribute: string
networkDeviceId: string
networkDeviceIpAddress: string
networkDeviceMacAddress: string
interfaceId: string
interfaceName: string
register: result
- name: Get Interfaces Info by id
cisco.dnac.interfaces_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
view: string
attribute: string
id: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|