cisco.dnac.interfaces_v1_info module -- Information module for Interfaces V1
Note
This module is part of the cisco.dnac collection (version 6.27.0).
To install it, use: ansible-galaxy collection install cisco.dnac.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.dnac.interfaces_v1_info.
New in cisco.dnac 6.15.0
Synopsis
Get all Interfaces V1.
Get Interfaces V1 by id.
Retrieves the list of the interfaces from all network devices based on the provided query parameters. The latest interfaces data in the specified start and end time range will be returned. When there is no start and end time specified returns the latest available data.
Returns the interface data for the given interface instance Uuid along with the statistics data. The latest interface data in the specified start and end time range will be returned. When there is no start and end time specified returns the latest available data for the given interface Id. For detailed information about the usage of the API, please refer to the Open API specification document - https //github.com/cisco-en- programmability/catalyst-center-api-specs/blob/main/Assurance/CE_Cat_Center_Org-interfaces-2.0.0-resolved.yaml.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
dnacentersdk >= 2.4.9
python >= 3.5
Parameters
Parameter |
Comments |
|---|---|
Attribute query parameter. The following list of attributes can be provided in the attribute field id,adminStatus, description,duplexConfig,duplexOper,interfaceIfIndex,interfaceType,ipv4Address,ipv6AddressLi st,isL3Interface,isWan,macAddress,mediaType,name,operStatus,peerStackMember,peerStackPort, portChannelId,portMode, portType,rxDiscards,rxError,rxRate,rxUtilization,speed,stackPortType,timestamp,txDis cards,txError,txRate,txUtilization,vlanId,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,sit eName,siteHierarchy,siteHierarchyId,poeAdminStatus,poeOperStatus,chassisId,moduleId,pdClassSignal,pdClassSpa re,pdDeviceType,pdDeviceModel,pdPowerAdminMaxInWatt,pdPowerBudgetInWatt,pdPowerConsumedInWatt,pdPowerRemaini ngInWatt,pdMaxPowerDrawn,pdConnectedDeviceList,poeOperPriority,fastPoEEnabled,perpetualPoEEnabled,policingPo EEnabled,upoePlusEnabled,fourPairEnabled,poeDataTimestamp,pdLocation,pdDeviceName,pdConnectedSwitch,connecte dSwitchUuid,ieeeCompliant,connectedSwitchType If length of attribute list is too long, please use 'views' param instead. Examples attributes=name (single attribute requested) attributes=name&description&duplexOper (multiple attributes with comma separator). |
|
Flag for Cisco DNA Center SDK to enable debugging. Choices: |
|
The Cisco DNA Center hostname. |
|
The Cisco DNA Center password to authenticate. |
|
The Cisco DNA Center port. Default: :ansible-option-default:`443` |
|
The Cisco DNA Center username to authenticate. Default: :ansible-option-default:`"admin"` |
|
Flag to enable or disable SSL certificate verification. Choices: |
|
Informs the SDK which version of Cisco DNA Center to use. Default: :ansible-option-default:`"2.3.7.6"` |
|
EndTime query parameter. End time to which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. |
|
Additional headers. |
|
Id path parameter. The interface Uuid. |
|
InterfaceId query parameter. The list of Interface Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `interfaceId=6bef213c-19ca-4170-8375-b694e251101c` (single interface uuid ) `interfaceId=6bef213c- 19ca-4170-8375-b694e251101c&32219612-819e-4b5e-a96b-cf22aca13dd9&2541e9a7-b80d-4955-8aa2-79b233318ba0` (multiple Interface uuid with & separator). |
|
InterfaceName query parameter. The list of Interface name (Ex. `GigabitEthernet1/0/1`) This field supports wildcard (`*`) character-based search. Ex `*1/0/1*` or `1/0/1*` or `*1/0/1` Examples `interfaceNames=GigabitEthernet1/0/1` (single interface name) `interfaceNames=GigabitEthernet1/0/1&GigabitEthernet2/0/1&GigabitEthernet3/0/1` (multiple interface names with & separator). |
|
Limit query parameter. Maximum number of records to return. |
|
NetworkDeviceId query parameter. The list of Network Device Uuids. (Ex. `6bef213c-19ca-4170-8375-b694e251101c`) Examples `networkDeviceId=6bef213c-19ca-4170-8375-b694e251101c` (single networkDeviceId requested) `networkDeviceId=6bef213c-19ca-4170-8375- b694e251101c&networkDeviceId=32219612-819e-4b5e-a96b-cf22aca13dd9&networkDeviceId=2541e9a7-b80d-4955-8aa2- 79b233318ba0` (multiple networkDeviceIds with & separator). |
|
NetworkDeviceIpAddress query parameter. The list of Network Device management IP Address. (Ex. `121.1.1.10`) This field supports wildcard (`*`) character-based search. Ex `*1.1*` or `1.1*` or `*1.1` Examples `networkDeviceIpAddress=121.1.1.10` `networkDeviceIpAddress=121.1.1.10&networkDeviceIpAddress=172.20.1.10&networkDeviceIpAddress=10.10.20.10` (multiple networkDevice IP Address with & separator). |
|
NetworkDeviceMacAddress query parameter. The list of Network Device MAC Address. (Ex. `64 f6 9d 07 9a 00`) This field supports wildcard (`*`) character-based search. Ex `*AB AB AB*` or `AB AB AB*` or `*AB AB AB` Examples `networkDeviceMacAddress=64 f6 9d 07 9a 00` `networkDeviceMacAddress=64 f6 9d 07 9a 00&networkDeviceMacAddress=70 56 9d 07 ac 77` (multiple networkDevice MAC addresses with & separator). |
|
Offset query parameter. Specifies the starting point within all records returned by the API. It's one based offset. The starting value is 1. |
|
Order query parameter. The sort order of the field ascending or descending. |
|
SiteHierarchy query parameter. The full hierarchical breakdown of the site tree starting from Global site name and ending with the specific site name. The Root site is named "Global" (Ex. `Global/AreaName/BuildingName/FloorName`) This field supports wildcard asterisk (`*`) character search support. E.g. `*/San*, */San, /San*` Examples `?siteHierarchy=Global/AreaName/BuildingName/FloorName` (single siteHierarchy requested) `?siteHierarchy=Global/AreaName/BuildingName/FloorName&siteHierarchy=Global /AreaName2/BuildingName2/FloorName2` (multiple siteHierarchies requested). |
|
SiteHierarchyId query parameter. The full hierarchy breakdown of the site tree in id form starting from Global site UUID and ending with the specific site UUID. (Ex. `globalUuid/areaUuid/buildingUuid/floorUuid`) This field supports wildcard asterisk (`*`) character search support. E.g. `*uuid*, *uuid, uuid*` Examples `?siteHierarchyId=globalUuid/areaUuid/buildingUuid/floorUuid `(single siteHierarchyId requested) `?siteHiera rchyId=globalUuid/areaUuid/buildingUuid/floorUuid&siteHierarchyId=globalUuid/areaUuid2/buildingUuid2/floorUu id2` (multiple siteHierarchyIds requested). |
|
SiteId query parameter. The UUID of the site. (Ex. `flooruuid`) Examples `?siteId=id1` (single id requested) `?siteId=id1&siteId=id2&siteId=id3` (multiple ids requested). |
|
SortBy query parameter. A field within the response to sort by. |
|
StartTime query parameter. Start time from which API queries the data set related to the resource. It must be specified in UNIX epochtime in milliseconds. Value is inclusive. If `startTime` is not provided, API will default to current time. |
|
Flag for Cisco DNA Center SDK to enable the validation of request bodies against a JSON schema. Choices: |
|
View query parameter. Views which are supported by this API. Each view represents a specific data set. ### Response data provided by each view 1. **configuration** id,name,adminStatus,description,duplexConfig,duplex Oper,interfaceIfIndex,interfaceType,ipv4Address,ipv6AddressList,isL3Interface,isWan,macAddress,mediaType,nam e,operStatus, portChannelId,portMode, portType,speed,timestamp,vlanId,networkDeviceId,networkDeviceIpAddress ,networkDeviceMacAddress,siteName,siteHierarchy,siteHierarchyId 2. **statistics** id,name,rxDiscards,rxError ,rxRate,rxUtilization,txDiscards,txError,txRate,txUtilization,networkDeviceId,networkDeviceIpAddress,network DeviceMacAddress,siteName,siteHierarchy,siteHierarchyId 3. **stackPort** id,name,peerStackMember,peerStackPo rt,stackPortType,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,siteName,siteHierarchy,siteH ierarchyId 4. **poE** id, name,rxDiscards,rxError,rxRate,rxUtilization,txDiscards,txError,txRate,txUtilizati on,networkDeviceId,networkDeviceIpAddress,networkDeviceMacAddress,siteName,siteHierarchy,siteHierarchyId When this query parameter is not added by default all configuration attributes will be available in the response. **configuration,statistics,stackPort**. |
Notes
Note
SDK Method used are devices.Devices.get_the_interface_data_for_the_given_interface_idinstance_uuid_along_with_the_statistics_and_poe_data_v1, devices.Devices.gets_interfaces_along_with_statistics_and_poe_data_from_all_network_devices_v1,
Paths used are get /dna/data/api/v1/interfaces, get /dna/data/api/v1/interfaces/{id},
Supports
check_modeThe plugin runs on the control node and does not use any ansible connection plugins, but instead the embedded connection manager from Cisco DNAC SDK
The parameters starting with dnac_ are used by the Cisco DNAC Python SDK to establish the connection
See Also
See also
- Cisco DNA Center documentation for Devices GetTheInterfaceDataForTheGivenInterfaceIdinstanceUuidAlongWithTheStatisticsAndPoeDataV1
Complete reference of the GetTheInterfaceDataForTheGivenInterfaceIdinstanceUuidAlongWithTheStatisticsAndPoeDataV1 API.
- Cisco DNA Center documentation for Devices GetsInterfacesAlongWithStatisticsAndPoeDataFromAllNetworkDevicesV1
Complete reference of the GetsInterfacesAlongWithStatisticsAndPoeDataFromAllNetworkDevicesV1 API.
Examples
- name: Get all Interfaces V1
cisco.dnac.interfaces_v1_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
limit: 0
offset: 0
sortBy: string
order: string
siteHierarchy: string
siteHierarchyId: string
siteId: string
view: string
attribute: string
networkDeviceId: string
networkDeviceIpAddress: string
networkDeviceMacAddress: string
interfaceId: string
interfaceName: string
register: result
- name: Get Interfaces V1 by id
cisco.dnac.interfaces_v1_info:
dnac_host: "{{dnac_host}}"
dnac_username: "{{dnac_username}}"
dnac_password: "{{dnac_password}}"
dnac_verify: "{{dnac_verify}}"
dnac_port: "{{dnac_port}}"
dnac_version: "{{dnac_version}}"
dnac_debug: "{{dnac_debug}}"
headers: "{{my_headers | from_json}}"
startTime: 0
endTime: 0
view: string
attribute: string
id: string
register: result
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|