cisco.catalystcenter.wireless_provision_device_create module -- Resource module for Wireless Provision Device Create
Note
This module is part of the cisco.catalystcenter collection (version 2.3.1).
To install it, use: ansible-galaxy collection install cisco.catalystcenter.
You need further requirements to be able to use this module,
see Requirements for details.
To use it in a playbook, specify: cisco.catalystcenter.wireless_provision_device_create.
New in cisco.catalystcenter 3.1.0
Synopsis
Manage operation create of the resource Wireless Provision Device Create.
Provision wireless device.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
catalystcentersdk >= 3.1.6.0.0
python >= 3.12
Parameters
Parameter |
Comments |
|---|---|
Flag for Cisco Catalyst Center SDK to enable debugging. Choices: |
|
The Cisco Catalyst Center hostname. |
|
The Cisco Catalyst Center password to authenticate. |
|
The Cisco Catalyst Center port. Default: :ansible-option-default:`443` |
|
The Cisco Catalyst Center username to authenticate. Default: :ansible-option-default:`"admin"` |
|
Flag to enable or disable SSL certificate verification. Choices: |
|
Informs the SDK which version of Cisco Catalyst Center to use. Default: :ansible-option-default:`"3.1.6.0"` |
|
Additional headers. |
|
Wireless Provision Device Create's payload. |
|
Controller Name. |
|
Wireless Provision Device Create's dynamicInterfaces. |
|
Interface Gateway. Required for AireOS. |
|
Interface IP Address. Required for AireOS. |
|
Interface Name. Required for both AireOS and EWLC. |
|
Interface Netmask In CIDR. Required for AireOS. |
|
Lag Or Port Number. Required for AireOS. |
|
VLAN ID. Required for both AireOS and EWLC. |
|
List of managed AP locations (Site Hierarchies). |
|
Full Site Hierarchy where device has to be assigned. |
|
Flag for Cisco Catalyst Center SDK to enable the validation of request bodies against a JSON schema. Choices: |
Notes
Note
SDK Method used are wireless.Wireless.provision,
Paths used are post /dna/intent/api/v1/wireless/provision,
Does not support
check_modeThe plugin runs on the control node and does not use any ansible connection plugins,
but instead uses the embedded connection manager from Cisco CATALYST SDK
See Also
See also
- Cisco DNA Center documentation for Wireless Provision
Complete reference of the Provision API.
Examples
---
- name: Create
cisco.catalystcenter.wireless_provision_device_create:
catalystcenter_host: "{{catalystcenter_host}}"
catalystcenter_username: "{{catalystcenter_username}}"
catalystcenter_password: "{{catalystcenter_password}}"
catalystcenter_verify: "{{catalystcenter_verify}}"
catalystcenter_port: "{{catalystcenter_port}}"
catalystcenter_version: "{{catalystcenter_version}}"
catalystcenter_debug: "{{catalystcenter_debug}}"
headers: '{{my_headers | from_json}}'
payload:
- deviceName: string
dynamicInterfaces:
- interfaceGateway: string
interfaceIPAddress: string
interfaceName: string
interfaceNetmaskInCIDR: 0
lagOrPortNumber: 0
vlanId: 0
managedAPLocations:
- string
site: string
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
A dictionary or list with the response returned by the Cisco DNAC Python SDK Returned: always |